一区二区三区成人-一区二区三区www-一区二区三区 日韩-一区二区日韩欧美-一区二区日韩精品中文字幕-一区二区日韩

liu2004
級別: *
精華主題: * 篇
發帖數量: * 個
工控威望: * 點
下載積分: * 分
在線時間: (小時)
注冊時間: *
最后登錄: *
查看liu2004的 主題 / 回貼
樓主  發表于: 2011-05-04 20:42
要的請留郵箱,太大。
                  


Motion Controller Peripheral Software Package
SW6RNC-GSVHELPE
-------------------------------------------------------------------------


Thank you for purchasing this software.
You should carefully read the following terms and conditions
before using this software. And that you can refer the manuals
of WindowsNT/98/2000/XP to resolve the basic operation of
Windows NT/98/2000/XP.

1. Operating requirements

  (a) Hardware requirements
    ?  100% WindowsNT/98/2000/XP compatible PC/AT
            (not support multi-processor)
    ?   CPU :
                Windows NT/98 : Pentium 133-MHz or more recommended
                Windows 2000  : Pentium II 233-MHz or more recommended
                Windows XP    : Pentium II 450-MHz or more recommended
                 (Pentium II 233-MHz or more for Windows 2000)
    ?   Memory : It depends on the OS environment.
                Windows NT/98 : 32 MB or more recommended.
                Windows 2000  : 64 MB or more recommended.
                Windows XP    : 192 MB or more recommended.
    ?   Free disk: 68 MB or more
    ?   Monitor resolution: SVGA(800*600/256 Colors) or more


  (b) OS requirements
    ?   Windows NT Workstation Ver. 4.0(Service Pack2 or later)
    ?   Windows 98
        ?   Windows 2000
        ?   Windows XP Professional
        ?   Windows XP Home Edition

        * The following Windows version is not supported.
            ? Windows NT 3.5 Workstation
        ? Windows NT 3.51 Workstation
            ? Windows NT Server
            ? Windows 95
        * In Windows NT 4.0,the use needs Microsoft Internet Explorer 3.01
          or higher.

2. Installation method

  First, close any others applications running on Windows NT/98/2000/XP.

  From [Start] select [Run...],input "X:setup.exe"(X: CD-ROM Drive)
or click [Browse] and select "Setup.exe" from the CD-ROM drive.
  After starting the installor , follow the instructions of the installor.

3. Notice

(1) When you install this software to a drive which is compressed by
DriveSpace or other tools, if it freezes in installation, please increase
the free space of the drive or select other drive which is not compressed
to install this software.

(2) If you want to change the installation destination or reinstall it,
please uninstall it before installing it again.

(3) Depending on the system font size of Windows NT/98/2000/XP, sometimes
the screen may not be displayed properly, please use a small size font.



-------------------------------------------------------------------------------------

Microsoft and MS-DOS, Windows, Windows NT are registered trademarks of
Microsoft Corporation in the United States and other countries.

Copyright(c) 2001 MITSUBISHI ELECTRIC CORPORATION All Rights Reserved.
zhang850412
有可以拔13570997576 張工
級別: 工控俠客
精華主題: 0
發帖數量: 256 個
工控威望: 2209 點
下載積分: 13860 分
在線時間: 1087(小時)
注冊時間: 2009-07-19
最后登錄: 2025-01-08
查看zhang850412的 主題 / 回貼
1樓  發表于: 2011-05-04 22:35
謝謝樓主…[email protected]
zyfzxh
級別: 論壇版主

精華主題: 12 篇
發帖數量: 6498 個
工控威望: 7506 點
下載積分: 108148 分
在線時間: 4838(小時)
注冊時間: 2006-08-10
最后登錄: 2025-02-07
查看zyfzxh的 主題 / 回貼
2樓  發表于: 2011-05-05 07:54
http://down.ymmfa.com/?id=24
這裡就有,
請說明樓主的版本?
aaaa0595
級別: 略有小成
精華主題: 1 篇
發帖數量: 247 個
工控威望: 304 點
下載積分: 437 分
在線時間: 77(小時)
注冊時間: 2007-07-01
最后登錄: 2024-08-05
查看aaaa0595的 主題 / 回貼
3樓  發表于: 2011-05-06 11:47
廣東工程
級別: *
精華主題: * 篇
發帖數量: * 個
工控威望: * 點
下載積分: * 分
在線時間: (小時)
注冊時間: *
最后登錄: *
查看廣東工程的 主題 / 回貼
4樓  發表于: 2011-05-06 13:21
謝謝了,樓主
song2007
song2007
級別: 略有小成
精華主題: 0
發帖數量: 110 個
工控威望: 257 點
下載積分: 500 分
在線時間: 308(小時)
注冊時間: 2007-10-31
最后登錄: 2025-02-06
查看song2007的 主題 / 回貼
5樓  發表于: 2011-05-08 16:47
[email protected]
謝謝樓主的無私貢獻。
sxy
級別: 略有小成
精華主題: 0
發帖數量: 67 個
工控威望: 235 點
下載積分: 484 分
在線時間: 90(小時)
注冊時間: 2008-12-25
最后登錄: 2025-01-08
查看sxy的 主題 / 回貼
6樓  發表于: 2011-05-09 02:25
你有沒有 運動CPU  程式呢  發來研究下
good
級別: 略有小成
精華主題: 0
發帖數量: 273 個
工控威望: 489 點
下載積分: 788 分
在線時間: 46(小時)
注冊時間: 2008-04-11
最后登錄: 2022-12-10
查看good的 主題 / 回貼
7樓  發表于: 2011-05-09 21:56
能發一份給我嗎?我的是[email protected]       在此謝過了
lzdcy321
級別: 略有小成
精華主題: 0
發帖數量: 120 個
工控威望: 201 點
下載積分: 682 分
在線時間: 46(小時)
注冊時間: 2010-07-16
最后登錄: 2023-04-15
查看lzdcy321的 主題 / 回貼
8樓  發表于: 2011-05-09 23:05
謝謝了,樓主!!!!!!!!!
leozhaott
級別: 探索解密
精華主題: 0
發帖數量: 28 個
工控威望: 146 點
下載積分: 610 分
在線時間: 11(小時)
注冊時間: 2011-06-20
最后登錄: 2012-08-08
查看leozhaott的 主題 / 回貼
9樓  發表于: 2011-06-21 21:51
我想要SW8RNC-GSVHELPE  用于三菱Q173DCPU的  找了好久都沒找著呢!希望有的能發一個給我!
leozhaott
級別: 探索解密
精華主題: 0
發帖數量: 28 個
工控威望: 146 點
下載積分: 610 分
在線時間: 11(小時)
注冊時間: 2011-06-20
最后登錄: 2012-08-08
查看leozhaott的 主題 / 回貼
10樓  發表于: 2011-06-21 21:53
剛剛忘了郵箱了   郵箱:[email protected]
顧仁仁
級別: 略有小成
精華主題: 0
發帖數量: 338 個
工控威望: 342 點
下載積分: 533 分
在線時間: 199(小時)
注冊時間: 2007-10-28
最后登錄: 2024-12-05
查看顧仁仁的 主題 / 回貼
11樓  發表于: 2011-07-10 11:02
謝謝樓主…  [email protected]

主站蜘蛛池模板: 男女男精品视频网站 | 国产精品久久久久久久久久久久 | 日韩欧美在线一区二区三区 | 亚洲欧美日韩精品久久亚洲区 | 午夜在线观看免费完整直播网 | 青草青青在线 | 日本精品久久久久久久久免费 | 欧美三级做爰全过程 | 五月激激激综合网色播免费 | 天天操天天干天天做 | 香蕉eeww99国产精选播放 | 日本大片免a费观看在线 | 欧美图片另类小说综合 | 国产精品福利在线观看入口 | 天天视频国产精品 | 99爱免费视频 | av中文字幕在线 | 久久精品视在线观看2 | 国产传媒在线播放 | 亚欧有色在线观看免费版高清 | 免费岛国 | 欧美8x8x| 青青热久久综合网伊人 | 丝瓜视频黄色在线观看 | 俄罗斯freeoo性另类 | 欧美一区二区三区四区在线观看 | 日韩在线观看免费 | 好硬好大好浪夹得好紧h | 青青色综合 | 满溢游泳池免费土豪全集下拉版 | 五月婷婷在线免费观看 | 无码区国产区在线播放 | 青草草在线观看 | 99久久精品免费看国产 | 1986葫芦兄弟全集免费观看第十集 | 天天干天天色综合网 | 女人爽到喷水的视频免费看 | 小小水蜜桃免费影院 | 亚洲天堂影院在线观看 | 欧美日韩精品一区二区三区视频 | 3黑人巨大vs北岛玲 3d肉浦团在线观看 3d动漫免费 |