一区二区三区成人-一区二区三区www-一区二区三区 日韩-一区二区日韩欧美-一区二区日韩精品中文字幕-一区二区日韩

liu2004
級別: *
精華主題: * 篇
發帖數量: * 個
工控威望: * 點
下載積分: * 分
在線時間: (小時)
注冊時間: *
最后登錄: *
查看liu2004的 主題 / 回貼
樓主  發表于: 2011-05-04 20:42
要的請留郵箱,太大。
                  


Motion Controller Peripheral Software Package
SW6RNC-GSVHELPE
-------------------------------------------------------------------------


Thank you for purchasing this software.
You should carefully read the following terms and conditions
before using this software. And that you can refer the manuals
of WindowsNT/98/2000/XP to resolve the basic operation of
Windows NT/98/2000/XP.

1. Operating requirements

  (a) Hardware requirements
    ?  100% WindowsNT/98/2000/XP compatible PC/AT
            (not support multi-processor)
    ?   CPU :
                Windows NT/98 : Pentium 133-MHz or more recommended
                Windows 2000  : Pentium II 233-MHz or more recommended
                Windows XP    : Pentium II 450-MHz or more recommended
                 (Pentium II 233-MHz or more for Windows 2000)
    ?   Memory : It depends on the OS environment.
                Windows NT/98 : 32 MB or more recommended.
                Windows 2000  : 64 MB or more recommended.
                Windows XP    : 192 MB or more recommended.
    ?   Free disk: 68 MB or more
    ?   Monitor resolution: SVGA(800*600/256 Colors) or more


  (b) OS requirements
    ?   Windows NT Workstation Ver. 4.0(Service Pack2 or later)
    ?   Windows 98
        ?   Windows 2000
        ?   Windows XP Professional
        ?   Windows XP Home Edition

        * The following Windows version is not supported.
            ? Windows NT 3.5 Workstation
        ? Windows NT 3.51 Workstation
            ? Windows NT Server
            ? Windows 95
        * In Windows NT 4.0,the use needs Microsoft Internet Explorer 3.01
          or higher.

2. Installation method

  First, close any others applications running on Windows NT/98/2000/XP.

  From [Start] select [Run...],input "X:setup.exe"(X: CD-ROM Drive)
or click [Browse] and select "Setup.exe" from the CD-ROM drive.
  After starting the installor , follow the instructions of the installor.

3. Notice

(1) When you install this software to a drive which is compressed by
DriveSpace or other tools, if it freezes in installation, please increase
the free space of the drive or select other drive which is not compressed
to install this software.

(2) If you want to change the installation destination or reinstall it,
please uninstall it before installing it again.

(3) Depending on the system font size of Windows NT/98/2000/XP, sometimes
the screen may not be displayed properly, please use a small size font.



-------------------------------------------------------------------------------------

Microsoft and MS-DOS, Windows, Windows NT are registered trademarks of
Microsoft Corporation in the United States and other countries.

Copyright(c) 2001 MITSUBISHI ELECTRIC CORPORATION All Rights Reserved.
zhang850412
有可以拔13570997576 張工
級別: 工控俠客
精華主題: 0
發帖數量: 256 個
工控威望: 2209 點
下載積分: 13860 分
在線時間: 1087(小時)
注冊時間: 2009-07-19
最后登錄: 2025-01-08
查看zhang850412的 主題 / 回貼
1樓  發表于: 2011-05-04 22:35
謝謝樓主…[email protected]
zyfzxh
級別: 論壇版主

精華主題: 12 篇
發帖數量: 6497 個
工控威望: 7505 點
下載積分: 108086 分
在線時間: 4838(小時)
注冊時間: 2006-08-10
最后登錄: 2025-01-27
查看zyfzxh的 主題 / 回貼
2樓  發表于: 2011-05-05 07:54
http://down.ymmfa.com/?id=24
這裡就有,
請說明樓主的版本?
aaaa0595
級別: 略有小成
精華主題: 1 篇
發帖數量: 247 個
工控威望: 304 點
下載積分: 437 分
在線時間: 77(小時)
注冊時間: 2007-07-01
最后登錄: 2024-08-05
查看aaaa0595的 主題 / 回貼
3樓  發表于: 2011-05-06 11:47
廣東工程
級別: *
精華主題: * 篇
發帖數量: * 個
工控威望: * 點
下載積分: * 分
在線時間: (小時)
注冊時間: *
最后登錄: *
查看廣東工程的 主題 / 回貼
4樓  發表于: 2011-05-06 13:21
謝謝了,樓主
song2007
song2007
級別: 略有小成
精華主題: 0
發帖數量: 110 個
工控威望: 257 點
下載積分: 500 分
在線時間: 307(小時)
注冊時間: 2007-10-31
最后登錄: 2025-01-22
查看song2007的 主題 / 回貼
5樓  發表于: 2011-05-08 16:47
[email protected]
謝謝樓主的無私貢獻。
sxy
級別: 略有小成
精華主題: 0
發帖數量: 67 個
工控威望: 235 點
下載積分: 484 分
在線時間: 90(小時)
注冊時間: 2008-12-25
最后登錄: 2025-01-08
查看sxy的 主題 / 回貼
6樓  發表于: 2011-05-09 02:25
你有沒有 運動CPU  程式呢  發來研究下
good
級別: 略有小成
精華主題: 0
發帖數量: 273 個
工控威望: 489 點
下載積分: 788 分
在線時間: 46(小時)
注冊時間: 2008-04-11
最后登錄: 2022-12-10
查看good的 主題 / 回貼
7樓  發表于: 2011-05-09 21:56
能發一份給我嗎?我的是[email protected]       在此謝過了
lzdcy321
級別: 略有小成
精華主題: 0
發帖數量: 120 個
工控威望: 201 點
下載積分: 682 分
在線時間: 46(小時)
注冊時間: 2010-07-16
最后登錄: 2023-04-15
查看lzdcy321的 主題 / 回貼
8樓  發表于: 2011-05-09 23:05
謝謝了,樓主!!!!!!!!!
leozhaott
級別: 探索解密
精華主題: 0
發帖數量: 28 個
工控威望: 146 點
下載積分: 610 分
在線時間: 11(小時)
注冊時間: 2011-06-20
最后登錄: 2012-08-08
查看leozhaott的 主題 / 回貼
9樓  發表于: 2011-06-21 21:51
我想要SW8RNC-GSVHELPE  用于三菱Q173DCPU的  找了好久都沒找著呢!希望有的能發一個給我!
leozhaott
級別: 探索解密
精華主題: 0
發帖數量: 28 個
工控威望: 146 點
下載積分: 610 分
在線時間: 11(小時)
注冊時間: 2011-06-20
最后登錄: 2012-08-08
查看leozhaott的 主題 / 回貼
10樓  發表于: 2011-06-21 21:53
剛剛忘了郵箱了   郵箱:[email protected]
顧仁仁
級別: 略有小成
精華主題: 0
發帖數量: 338 個
工控威望: 342 點
下載積分: 533 分
在線時間: 199(小時)
注冊時間: 2007-10-28
最后登錄: 2024-12-05
查看顧仁仁的 主題 / 回貼
11樓  發表于: 2011-07-10 11:02
謝謝樓主…  [email protected]

主站蜘蛛池模板: 91丝袜足控免费网站xx | 国产福利在线观看第二区 | 福利视频一区青娱 | 日本视频二区 | 久久久无码精品无码国产人妻丝瓜 | 92福利网| 久久精品熟女亚洲AV国产 | 三级黄色图片 | 午夜欧美精品久久久久久久久 | 大胸纲手被羞羞漫画网站 | 2020国语对白露脸 | 色亚洲视频 | 国产ab| 国产伦精品一区二区 | 星星动漫在线观看免费 | 奇米影视一区 | 99久久免费看精品国产一区 | 91porny新九色在线 | 日韩精品成人 | 国产精品国产国产aⅴ | 91亚洲视频在线观看 | 校草太大了h | 久久中文字幕免费高清 | 色播影院性播影院私人影院 | 法国贵妇一级伦理hd | 亚洲成a人不卡在线观看 | 男人的天堂视频 | 精品第一国产综合精品蜜芽 | 接吻吃胸摸下面啪啪教程 | 天堂网www在线观看 天堂欧美 | 三上悠亚久久国产 | 久久久久久免费观看 | 九九九好热在线 | 日韩一区二区三区四区区区 | 欧美疯狂做爰xx | 咪咪爱网友自拍 | 日本在线播放 | 国产美女屁股直流白浆视频无遮挡 | 皇上好大好硬好涨好深好爽 | 国产小视频免费看 | 99视频都是精品热在线播放 |